September 25, 2023


Carefully Crafted Home

Upholster Your Home furniture With an Old Sweater

Image for article titled Upholster Your Furniture With an Old Sweater

Picture: joserpizarro (Shutterstock)

If you have a sweater you like but no lengthier don, there is another way you can give it a new daily life: Superior nevertheless, you can give an previous piece of furniture new daily life, as effectively. Introducing some texture or colour to a exhausted piece of home furnishings with this exceptional Do-it-yourself is the two uncomplicated and thrifty. You can generate a really a single-of-a-sort piece with just a couple of equipment by subsequent these steps.

To starto re-masking a chair seat, stool, or cushion, you’ll will need a sweater you wouldn’t thoughts reducing up, some cloth scissors, a flathead screwdriver, a pair of pliers, a staple gun, and some upholstery lining (if the prior lining is broken or if there isn’t any).

How to take away outdated home furnishings upholstery lining

Commence by turning your furnishings piece upside down so you can see all the lining and staples or upholstery tacks. You will typically see some black or gray lining that keeps all the things on the underside of the seat wanting neat. Meticulously take away the staples that connect the material, as you can reuse it once the new sweater upholstery is in area. If it is broken, get some new lining and use the aged lining as a pattern to reduce it to healthy. After you’ve gotten the lining cost-free, you can set it apart.

Take out the old upholstery and staples

Future get a search at the edge of the old upholstery. It will most likely be held in put with staples or upholstery tacks. Use your screwdriver and pliers to clear away the staples. If the aged staples are hard to eliminate, attempt putting your flathead beneath the material and pulling up from beneath. In some cases, spreading out the drive will aid loosen stubborn staples with out getting them break and get trapped. If you do finish up with staples that crack and you can not get the items all the way out, you can use a pair of nippers to lower them small and then a nail set to hammer them flush so that they never stab you.

Incorporate lining, cushion, and batting

Once the previous material has been taken out, consider a appear at the batting and the cushion substance within. If it’s intact, you can start off re-covering your seat by cutting the upholstery lining to the exact same dimension and shape as the past upholstery, employing the outdated upholstery as a sample. If the padding requires to be replaced, you can get new foam and batting and slice it to in shape. Make positive to be aware the approximate depth of your cushion for an accurate healthy.

Maintain the foam in location the moment it’s reduce, then extend the batting above top rated of it, stapling just one edge alongside the bottom of your seat and then stretching it and stapling the opposite aspect commencing in the center and doing work in direction of the corners. Then staple alongside the other two sides, keeping the product firmly adequate to pull out any wrinkles. Repeat this process with the upholstery lining, stapling it about a 50 percent inch from the edge all the way all over.

Connect your salvaged sweater

After your piece is lined and cushioned, just take your salvaged sweater material and spread it out flat. The sleeves should be removed at the shoulder seams, and the fabric can then be reduce and unfold flat. Orient your sweater material in the ideal route to get the pattern lined up and to include your seat. Make positive the correct side of the sweater material is going through down and put your seat upside down on the product. Then, pull the again edge up and staple it together the base of the seat on 1 aspect about a 50 percent inch from the edge of the materials, pulling it taught. Then pull the other facet taught and staple from the middle out, chasing the wrinkles towards the corners. Staple together the sides next and then at the corners, fold any winkles inwards and staple and trim alongside the edge.

Last, substitute the old (or new) lining, turning the edges below, and overlapping the edges of your upholstery product to generate a clean edge. Then, convert your piece again more than and enjoy.